Procedures to Debug the Die of Wood Pellet Press

As its name implies, wood pellet mill is a machine used to pelletize those agricultural and forestry wastes into pellets of great value. After adjusting the pelletizing system well, you can operate the wood pellet making machine at normal. While, remember, you should open the discharging door on operating door during the working process.

Sequence for launching the parts of wood pellet mill should be dynamo first, agitator second and feeder last. When materials enter into the agitator, you should open the steam valve meanwhile. The saturated steam pressure should vary from the 0.2MPa to 0.4MPa. The steam temperature should be about 130-150 ℃.

For the water content in raw materials, it should be proper. If water content is higher than the rated, raw materials will be caked on the surface of moulding dies and block the die holes. On the contrary, if water content in raw materials is lower than the rated, softening degree of raw materials will be insufficient. As a result, the working efficiency of wood pellet mill will become poorer and poorer.

In general, before the working process of wood pellet machine, you’d better notice the water content of raw materials. After raw materials enter into the granulating room, you should firstly notice the discharging condition of finished products and then the current changes. Under the normal discharging, if the electric current is less than the rated, you can increase the flow of raw materials and steam until the current reaches to the rated.

Leave messages on website to get the discount of FTM wood pellet mill!

Fote Heavy Machinery: http://www.woodpelletmillsell.com

Fote Official Email: vip@sinoftm.com

PLC Control Technology of FTM Wood Pellet Mill

Wood pellet mill, also named as wood pellet machine, is mainly used to produce the particle fodders. The performance of wood pellet making machine can directly influence the manufacturing quality of particle fodders. Technologies for automatically controlling the feeding speed of wood pellet mill can ensure the stability of working current, exert the greatest value for production and avoid the material blocking. For the dynamo of feeder, it is equipped with the frequency converter for frequency control.

As to the electric control center, it uses the PLC control technology. Before the working process of wood pellet machine, you should input the required current for the normal working in the PLC controlling parameter. In general, the required current should be about 80％～95％of the rated current. During the working process of wood pellet machine, PLC control center can make the analysis between the actual values and set value. If the actual value is less than the set value, you should accelerate the feeding speed and intensify the feeding amount.

On the contrary, you should lower the feeding frequency and decrease the feeding amount. Through the feasible and reasonable programming control, PLC control technology can greatly ensure the stability of working current, fully exert the granulating performance and reduce the failure rate of wood pellet press. Known as the NO.1 brand of China Mining Machinery, FTM China Machinery looks forward to working with you in the near future. Please leave messages on the following website to get the discount for only three days.

Fote Heavy Machinery: http://www.woodpelletmillsell.com

Fote Official Email: vip@sinoftm.com

Role of Wood Pellet Mill for Fish Culturing

Wood pellet mill, also named as wood pellet machine, is an amazing machine with the ability to turn agricultural wastes into things of great value. Featured in the easy storage, convenient transportation and great nutrition, finished products of wood pellet machine can be used as fodders to feed fishes. By using the fodders, you can break the bottleneck of intensive feeding and stimulate the development for intensive and mechanical feeding.

Feeding on the fodders of wood pellet mill, the fishes are very excellent in the quality. They are more and more popular in the global markets. While, the increasing demands urges fishermen to balance the works of fish culture and fish selling. For fishermen, they should survey the market first, then confirm the details like breed varieties, culture specifications and selling season according to the market. Besides, they should actively explore the marketing channels.

By taking the ways of industrial consortia or fishermen cooperative, they can extend their markets and expand the industrial chains. Quality oriented, product will be excellent. With products being exported to countries like India, Pakistan, Japan, Australia, FTM China Machinery as the NO.1 brand of China mining machinery is well-received around the world markets. Being awarded the “Chinese Famous Brand”, FTM has made the production for more than 30 years.

Your satisfaction with the cost performance of FTM products is the endless pursuit. Interested in the price of wood pellet mill? Leave messages on website to get the discount. Meanwhile, we have the free hot E-books for you on website!

Fote Heavy Machinery: http://www.woodpelletmillsell.com

Fote Official Email: vip@sinoftm.com

Necessary Cleaning for FTM Wood Pellet Press

Wood pellet mill, also named as wood pellet machine, is mainly used to suppress those agricultural or forestry wastes into things of great value. The finished products, in the size of pellets, can be used as the biomass fuels for power plants and industrial boiler, etc. While, recently, we have received the feedback from users that dusts are easy to be produced during the working process of wood pellet making machine. More seriously, some raw powders are directly discharged out without any disposal. Reasons we blame are something wrong with the interior parts of wood pellet press.

As we all know, most raw materials of wood pellet mill are wet powders. If being fed with too much raw materials, the wood pellet machine will have something wrong with the dynamo. It is easy to solve the above problem. After opening the shell of wood pellet mill, you can use a thin brush to clean the remained raw materials. This simple behavior can not only prolong the service life, but also accelerate the working speed of wood pellet machine.

If the host system is aged, the revolving speed of host system will become slower. As a result, some raw materials will be directly discharged out without being processed in detail. While, this problem is not common nowadays. Since dynamos at present are all made by excellent materials under the premise of advanced technologies, they can perform well for a much longer period. While, problem of aged dynamos should not be neglected.

Interested in the price of wood pellet machine? Leave messages on website for a greater discount. Surprises for you!

Fote Heavy Machinery: http://www.woodpelletmillsell.com

Fote Official Email: vip@sinoftm.com

Installation Details for the FTM Wood Pellet Mill

As its name implies, wood pellet mill is a machine used to suppress materials into wood pellets. The following content will discuss about the details of installation for the wood pellet making machine. According to the site field, you should well place the dynamo, power distribution cabinet and conveyor, etc. Besides, you should carefully check the fixing condition of screws for connecting the dynamo and transmission part. If screws become loosened, you should immediately fix them.

If dynamo of wood pellet machine is in the model of FTM-6000, you should use six copper cables with area more than 16mm² to connect the dynamo with power distribution cabinet together. The order for connecting should be in sequence. Copper cables for connecting the feeding conveyor and power distribution cabinet should be three with area more than 1.5mm². Coppers cables, just like the above, can also be used as the power lines to connect the products conveyor and power distribution cabinet.

If the power distribution cabinet is in the model of FTM-6000, you can use the four phase cables. Among which, there of them with areas larger than 30mm² should be connected with the live wires of power capacity. While, for the remaining cable with area larger than 10mm², it can be connected with the null line of power capacity. Last, you should carefully check the power lines for the fear of anypower system fault.

Interested in the price of wood pellet making machine? Leave messages on website to get what you want.

Fote Heavy Machinery: http://www.woodpelletmillsell.com

Fote Official Email: vip@sinoftm.com

Factors for Molding Rate of Coal Briquette Plant

With wide application ranges, the coal briquette machine can be used to suppress materials like coal powder, iron powder, coking coal, aluminite powder, scrap iron, scale, carbon powder, charcoal powder, mineral slag, gypsum, tailings, sludge, kaolin, activated carbon and coke breeze, etc. The finished products of coal briquette machine can be widely used for industries like refractory material, power plant, metallurgy, chemical engineering, energy, transportation and heat supply, etc.

Except for the wide application ranges, the finished products are energy-conserving, environmental-friendly and easy for transportation. Therefore, the finished products of coal briquette plant are of great economic and social benefits. For many users of coal briquette press machine, they are more concerned about the molding rate. Then, what factors can influence the molding rate of coal briquette plant? The following content will give you answers.

The first factor is the water content in raw materials. If the water content in raw materials is great, the bonding between materials and press rollers is easy to be caused. As a result, the balling rate of coal briquette press is easy to be influenced. The second factor is the amount of foreign matters in raw materials. During the suppressing process, foreign matters inside will influence the bonding force between raw materials. As a result, the finished products will become loosened. The molding effect will be much poorer. Fote briquetting machine manufacturer sincerely welcomes you to come for site visit and inspection!

Click the website to know the price of coal briquette press! Leave messages on website for more information.

Fote Heavy Machinery: http://www.coal-briquettemachine.com

Fote Official Email: vip@sinoftm.com

Measures to Deal Bag Pasting of Three-drum Dryer

To avoid the appearance of dew point, you should strictly control the feeding mount and sulfur content of fuels. To lower the temperature of dew point, you should lower the content of sulfur dioxide in the flue gas. Then, you should stabilize the speed balance between the material feeding, hot air and material discharging. In order to control the amount of wet materials in the rotary drum, you should control the temperature of exhausted gas higher about 15 ℃ than the dew-point temperature.

When the temperature of exhausted gas closes to the dew point, you should stop the feeding work. When the amount of wet materials decreases and temperature of air heating furnace increases, you can recover the drying work. When the three-drum dryer stops working, you should immediately remove the dust on the filter bag and dust hopper. In order to avoid the heat dissipation of precipitator, you should make the temperature of shell, dust hopper and air pipe be well kept.

According to the specialty of exhausted gas and type of precipitator, you should accordingly select the filter materials of glass fiber, Nekton or oilproof polyester. As a professional supplier of three-drum dryer, Fote Machinery has made the production for more than 30 years. Known as the NO.1 brand of China Mining Machinery, Fote Machinery can also produce other dryers like sand rotary dryer, coal slime dryer, industrial dryer and sawdust dryer machine, etc.

Interested in the three-drum dryer of Fote Machinery? Please leave messages on our website or directly email us. Surprises for you on website!

Fote Heavy Machinery: http://www.ft-dryer.com

Fote Official Website: vip@sinoftm.com

Effort of FTM Crusher Company to Predict Risks

In the first three months of 2015, the national economy of China develops quite well. While, we need to realize that there still exist some unstable factors at home and abroad. For the development situation around the world, it is not favorable. In China, governments at all levels encourage enterprises to improve the predictive ability for potential risks and master the tendency of macro economy.

To better reduce the risks, suppliers of mobile crushers should invest more on the production costs, improve the competitive force of markets and promote the ability to predict the potential risks. For suppliers of mobile crushing plant, they should find the changing rules of market, predict the development tendency and make solutions to risks. For manufacturers of mobile stone crusher, it is of extreme importance to realize the sustainable and healthy development.

If suppliers of mobile crushing station possess the predictive ability for potential risks, they will be capable to make right solutions and calmly response when markets become turbulent. As a professional supplier of mobile crushers, FTM Crusher Company has made the production for more than 30 years and is known as the NO.1 brand of China Mining Machinery. During these years, FTM has accumulated rich production experience.

On the way to develop the mobile crushing plant, FTM Crusher Company stays awake before the temptations and interests, never does the impractical propaganda and treats every thing with the practical attitude. Interested in the price of mobile crushers? Please leave messages on the following website or directly email us. Free E-books for you on our website!

Fote Heavy Machinery: http://www.orecrusherfactory.com

Fote Official Email: vip@sinoftm.com

Gypsum Briquetting Machine of Fote Heavy Machinery

Most people think that it is easy to make the desulfurization gypsum. Actually, it is not as simple as you image. It is technical to produce the desulfurization gypsum. While, nowadays, there are a lot of difficult problems that urgently needed to be addressed. Most of them are related with the researches on the basic technological theories of desulfurization gypsum. At present, the working capacity of desulfurization gypsum briquette machine is only about 5,0000 tons to the largest.

Based on the poor working capacity, it is quite hard to develop the production scale. To change this condition, the only way is the joint production. Without the help of adhesives, desulfurization gypsum briquette machines of Fote briquetting machine manufacturer can suppress the watered material of desulfurization gypsum into briquettes or balls for one time. The finished briquettes, without the need to be dried, can be directly used for other purposes.

Featured in the great strength and high density, the finished briquettes are convenient for transportation and packaging. Featured in the impact structure, easy maintenance, simple operation, short technological process, low energy conservation and low failure rate, the desulfurization gypsum briquette machine can be a good helper for you. By virtue of the systemic after-sales service, Fote has established favorable long-term relationships with many mining enterprises at home and abroad.

As a professional supplier of desulfurization gypsum briquette machines, Fote has made the production for more than 30 years and is known as the NO.1 brand of China mining machinery. Surprises for you on our official website!

Fote Heavy Machinery: http://www.coal-briquettemachine.com

Fote Official Email: vip@sinoftm.com

Ventilatory Ways of Fote Sawdust Drying Machine

Sawdust dryer, also named as sawdust rotary dryer, is mainly used to dry agricultural and forestry materials like corn straw, soybean straw, cotton straw, wheat straw, sorghum straw, wood flour, wood shavings, saw dust, ginkgo leaf and mulberry leaf, etc. With wide application ranges, finished products of sawdust rotary dryer can be used for industries like straw briquette fuel, charcoal machinery, wood flour fuel, sawdust briquette and husbandry, etc.

For the traditional sawdust dryer, it has two ventilatory ways named as downstream and upstream. Each has its advantages and disadvantages. For the upgraded sawdust dryer machine, it adopts the mixing ventilation. This ventilatory way is excellent in accelerating the drying speed, saving energy and achieving the even drying effect. As to the installation of sawdust dryer, it has strict requirement toward the surrounded environment like wind scale and shock strength.

As the most basic data to measure the heating energy, the mean annual temperature in the working site is the most important parameter to design and confirm the devices equipped in the sawdust drying machine. Therefore, you should take the temperature changes into considerations when referring to the installation. Being the leader of China mining machinery, Fote Machinery has made the production for more than 30 years. 30 years can make a boy become a man. Similar to that, 30 years can make a small-sized enterprise become the NO.1 brand of China mining machinery.

Interested in the price of sawdust drying machine? Please leave messages on our website or directly email us. We will give you a detailed quotation in the shortest period.

Fote Heavy Machinery: http://www.ft-dryer.com

Fote Official Website: vip@sinoftm.com