Pellet Mill/32Pellet Machine/Small Pellet Mill

Pellet Mill, 32Pellet Machine, Small Pellet Mill

Ring Die Wood Pellet Machine Introduction

Ring die wood pellet machine is specially designed for pressing combustible materials into solid wood pellets. It conducts large-scale or industrial wood pellet production and the end pellets can be used for fuel in fireplace, boiler, gasifier or biomass power plant. Equipped with a forced feeder, it can produce excellent wood pellets with high density and combustion value. Ring dies with different bore diameters can be customized according to clients’ different demands; here we would like to recommend the wood pellet mill with whole diameters of 8mm, 10mm, 12mm, etc. Solid pellets produced from which are proved incentive and smokeless.

Remarkable Features of Ring Die Wood Pellet Machine

1. Main drive adopts high accurate gear drive, with an output of about 20% higher than belt drive.

2. The drive part of the machine including motor optimize, the high quality SKF bearings and NAK oil seals ensure high efficient and steady driving with low noise.

3. The imperative feeder device is adopted, which making the machine operate smoothly as the material like wood sawdust, corn, wheat, and rice straw is very light, so they are needed to be pushed into pelletizing chamber by force.

4. Special design of feed conditioner adopts the frequency-conversion speed regulating control to guarantee wood pellets quality.

5. The ring die is made by international advanced technology, has long service life and ensure smoothly pelletizing and high quality.

6. The international advanced compensation type flexible coupling is of novel and compact structure, safety, low noise and less trouble.

7. Permanent magnet device can remove impurities in the pelletizing process.

Using Scope and Purpose of Ring Die Pellet Mill

1. sawdust,straw,cotton stalk, rice husk, peanut shell,bamboo powder,palm and other plant waste;cement,ash,crbon powder,paper and other chemical raw materials of various kinds of difficult adhesive,molding difficult.

2. biofuel plant,power plant,wood processing plants,chemical plants,wineries,reuse of waste residues,is high density granulating molding equipment.

http://www.woodpelletmillsell.com/product/pellet-machine.html

Fote Official Email: vip@sinoftm.com

Drying Effect of Desulfurization Gypsum Dryer

Desulfurization gypsum dryer, also named as desulfurization gypsum drying machine, brings hopes for the power plant. With wide application ranges, the desulfurization gypsum drying machine can be widely used for industries like chemical engineering and metallurgy, etc. The drying effect of gypsum powder dryer is closely related with the heat-transfer ability of heat transfer, heating capacity of hot air furnace and disposing ability of exhausted gas. Under the best work of the above three factors, the desulfurization gypsum dryer can be very high-efficient and energy-conserving.

Heat transfer between desulfurization gypsum and hot air, with the running way of two steps forward and one step back, is very effective in prolonging the drying time and intensifying the drying effect. Under the heating work of hot air furnace, material of desulfurization gypsum can be rapidly dried. With regard to the disposing way toward the exhausted gas, it is mainly dependent on the dust remover. To lower the environmental pollution to the minimum, the dust remover is very smart to examine the dispersity of exhausted gas and select the optimal dust-cleaning scheme.

Fote Machinery always holds the service standard that users’ demand is the orientation to implement the service management, users’ satisfaction is goal to carry out the brand service. As for the service spirit of “enthusiasm, servant and faithfulness”, it should run through the whole service system. Interested in our products? please leave messages our official website or directly email us. Looking forward to working with you deal clients in the near future.

Fote Heavy Machinery: http://www.ft-dryer.com

Fote Official Email: vip@sinoftm.com

Future Development on FTM Jaw Crushing Machine

As the most ancient crusher, jaw crushing machine has been developed for more than hundred years. After the continuous research and development, the China jaw crusher has been improved a lot in the aspects of technological level, performance and quality. While, there are still something that are needed to be improved.

Jaw crushing machine is mainly used for coarse crushing. It is relatively difficult for the China jaw crusher to realize the secondary and tertiary crushing. If you want to get finer products, you need to buy impact crusher or sand maker, etc. Since the jaw crushing plant is relatively large in volume and heavy in weight, it will take a lot of spaces.

Since the jaw crusher machine is relatively large in energy conservation, there are still spaces for further development. Since the jaw crushers are quite limited in the crushing strength, a lot of energy will be consumed once the crushing strength is larger than the limited. What’s worse, the crushing effect will be somewhat less than satisfactory. After knowing about the above details, you should be more careful about the selection and operation of jaw crushing plant.

With the marketing principle that occupying market by products, creating market by service and leading market by popularity, FTM Crusher Company has been making a lot of efforts to practice this marketing principle. By virtue of excellent products and perfect service, FTM has established long-term cooperation with many enterprises. If you want to work with us, please feel free to visit our website and leave messages on it or directly email us. We will reply to you as soon as possible.

Fote Heavy Machinery: http://www.orecrusherfactory.com

Fote Official Email: vip@sinoftm.com

Straw Pellet Mill/Straw Pellet Mill Supplier

What is a Fote straw pellet mill?

Straw materials refer to crop residues including corn straw, wheat straw and rice straw etc. In the past, we used to crush and grind straws into powder materials used as feed for animals or fuel for industries. However, the low density of the straws results in problems of feed inconvenience and low combustion rate. At this time, the straw pellet mill is developed on the market to make full use of all kinds of straws. It is also called the crop stalks pellet machine.

Why is Fote straw pellet mill so popular?

1.Low cost: the crop stalks pellet machine can produce large profit margin because the crop straws are usually regarded as wastes with quite low collection cost.

2.Environment friendly: straw pellets made by our pellet mill are burnt fully with little emission of ash and CO2, thus causing little harm to the air.

3.Transportation convenience: the high density straw pellets are in small size, so it’s easy for us to store and transport them.

4.Wide range of application: the straw pellets can replace coal and natural gas to serve as the fuel for industrial boiler, livelihood energy, power station and chemical plant etc.

Fote straw pellet mill meets the increasing market demand

As the biomass fuel made by the crop stalks pellet machine can replace the traditional coal, petroleum and natural gas, it has been popular all over the world. With low raw material cost, the straw pellet millmanufacturing has become a hot industry with a large profit margin and unsaturated market. So it’s quite smart for customers to consider investing on the straw pellet mills.

http://www.chinawoodpelletmill.com/products/4-straw-pellet-mill.html

Email: vip@sinoftm.com

Relevant Infos About the Coal Briquetting Plant

Coal briquettes, as the finished product of coal briquetting plant, are great in thermal efficiency and effective in environmental protection. Different countries have different manufacturing methods of coal briquettes. In Turkey, except for using the coal briquette machine, people also use the materials of lignite coal, pipe cone, saw timber and paper wastewater to make the coal briquettes. In Spain, people use the mix of saw timber, olive nut and inferior coal to make coal briquettes. Except for the above materials, they use the humate as adhesive.

For users of coal briquette machine, they definitely know the importance of adhesive. Adhesive, rich in biomass fibers, can form network fabric. During the working process of coal briquetting plant, the network fabric can make the powdered materials more stabilized. Viscous fluid, being made of low molecular sugars and other fluids, can make the powdered materials firmly bond together.

Morality oriented, people will be honest; quality rooted, product will be excellent. By virtue of high quality, excellent performance and perfect one-stop service, FTM China Machinery is famous as the NO.1 brand of China mining machinery. With the near target to establish the NO.1 brand of China mining machinery, FTM never stops its way to offering the best products and services for customers.

Supported by the world-level production lines, first-class modern testing base and several state-level machinery research institutions, FTM always holds the service spirit that customer as God and quality as life. Looking forward to working with you in the near future. Sincerely welcome you to come for site visit and inspection.

Fote Heavy Machinery: http://www.woodpelletmillsell.com  

Fote Official Email: vip@sinoftm.com

Pellet Mill/Wood Shavings Pellet Mill

Why do we need to use the wood shavings pellet mill?

When we mention the wood shavings, we refer to the wood slices and long thin wood chips produced when we plane or shave the timber or wood. In general, these wood shavings are in roll shapes. In the past, wood shavings used to be abandoned or burnt directly with quite a low utilization rate, which formed a kind of energy waste. If we transform them into biomass fuel pellets, we may create new value from them. That’s the reason why we need the wood shavings pellet mill which is also called the wood particle pellet machine.

What is the working principle of wood shavings pellet machine?

The working principle of the ecological wood shavings pellet machine: press loose and amorphous wood shavings, wood particle, corn stalks, cotton stalks, straw, rice husk, sawdust and other biomass wastes with the roller die of wood shavings pellet mill, and compress them into biomass fuel pellets with cylinder shape and high density, under a certain temperature.

Prospects of wood shavings pellet mill:

Biomass pellet fuel is a kind of efficient, clean, renewable energy and the ideal alternative fuel of kerosene, which can not only save energy but also reduce emissions, with good economic and social benefits. The annual utilization rate of biomass solid fuel has reached 100 million tons in 2010 in our country, and it is expected that the annual utilization rate of biomass solid fuel will reach 50 million tons in 2020. Therefore, wood shavings pellet mill will be widely used in all over the world in future.

http://www.woodpelletmillsell.com/product/wood-shavings-pellet-mill.html

vip@sinoftm.com

How Does the Bag Filter Work for Three-drum Dryer?

Three-drum dryer, also named as three-drum drying machine, commonly uses the bag filter as the dedusting device. Featuring in stable operation, high working efficiency and easy maintenance, the bag filter is available for the dusty gas with diameter about 0.1 μm or larger. The dedusting efficiency can be more than 99%. By using the bag filter, you do not need to worry about the problem of over-standard dust emission.

Three-drum dryer is a kind of slant drum. Raw materials are fed into the drum from the higher end. Then, along with the continuous rotational motion, raw materials gradually move to the lower end. So, the three-drum dryer is not only a drying machine, but also a delivering device. The milled coal powders are injected into the drum by the air blower. The heat, produced by the combustion of coal powders, passes on the raw material by the three basic ways of convection, conduction and radiation.

As a kind of drying machine, the three-drum drying machine has wide space and thermal force field. By virtue of the sufficient air and excellent hot air furnace, the three-drum dryer can work much more smoothly and high-efficiently. With advanced technologies being introduced from America, Germany, Japan and Australia and products being exported to more than 30 countries, Fote Machinery is always doing its best to offer the best products and services for customers.

If you are interested in our products, please leave messages our official website or directly email us at vip@sinoftm.com. We will reply to you as soon as possible. Sincerely welcome you to come for site visit and inspection.

Fote Heavy Machinery: http://www.ft-dryer.com  

Fote Official E-mail: vip@sinoftm.com

Factors for the Productivity of Mobile Crushers

Mobile crushers, also named as mobile crushing plant, is mainly used to process materials like pebbles, mountain stones, mineral tailings and artificial sand, etc. For many users, they often concern about the ways to effectively improve the working efficiency of mobile stone crusher. Actually, to improve the working efficiency of mobile crusher, the first thing is to know what factors can influence the working efficiency. Broadly speaking, the working efficiency of mobile crushing station is easy to be influenced by the raw material and equipment itself.

Properties of hardness, humidity, viscosity and ingredient of raw material are directly related with the working efficiency of mobile crushers. Higher the hardness of raw material, larger the wear of mobile crushing plant. At the same time, larger the hardness of raw material, lower the crushing capacity of mobile stone crusher. Similarly, for raw materials with great humidity and viscosity, they are more difficult to be crushed.

As to the factor of equipment itself, it can also influence the working efficiency. For mobile crushing plant featuring in reliable quality, perfect performance, advanced technologies and reasonable structure, the working efficiency would not be object. If you want to improve the using efficiency of mobile crushing plant, FTM crusher company suggests you to make detailed treatment for raw materials in advance and work with professional manufacturers.

With the marketing principle that occupying market by products, creating market by service and leading market by popularity, FTM has been making a lot of efforts to practice this marketing principle. By virtue of excellent products and perfect service, FTM has established long-term cooperation with many enterprises.

Fote Heavy Machinery: http://www.orecrusherfactory.com

Fote Official Email: vip@sinoftm.com

Daily Maintenance for the Ring Die Pellet Mill

As a kind of agricultural machinery for making biomass, the ring die wood pellet mill is more and more popular among the common users by virtue of the convenient operation and excellent performance. Maintenance work is of significant importance for improving the flexibility and working efficiency of ring die pellet mill. Then, how to do the maintenance work well is the discussing point of this paper.

When it is necessary to change the ring die, you need to use the non-corrosive oil to extrude the original fodders out. By doing so, the discharging process of ring die wood pellet mill can be very smooth. What’s more, wear for the die hole can be effectively avoided. After being used for a much longer period, the ring die should be regularly checked for the fear of any failures.

If the surface of ring die is somewhat projecting, you should use the polishing machine or other tools to rub down the projecting areas. It is necessary to make frequent maintenance for the ring die, so the service life can be effectively prolonged. When you need to repair the ring die, you should notice that the lowest area of ring die surface should be about 2mm higher than the bottom of grinding undercut.

Morality oriented, people will be honest; quality rooted, product will be excellent. If you are interested in the products of FTM China Machinery, please feel free to visit our website or email us at vip@sinoftm.com for more information and price. We are looking forward to establishing long-lasting business relationships with you in the near future.

Fote Heavy Machinery: http://www.woodpelletmillsell.com

Fote Official Email: vip@sinoftm.com

Solutions to the Easy Wear of Coal Briquette Plant

Coal briquette press machine, also named as coal briquette machine, is mainly used to suppress those powdered materials with great molding difficulties like pulverized coal, iron powder, coking coal, aluminum ash, iron filings, iron oxide scale, carbon dust, powdered carbon, slag, gypsum, gangue, sludge, kaolin, active carbon, coke breeze and so on.

Featuring in high molding pressure, adjustable revolution of main engine, the coal briquette machine can be widely used for industries like refractory, powder plant, metallurgy, chemical engineering, energy, transportation and heating, etc. In order to solve the problem of easy wear for the press rollers, we Fote has done a lot of efforts.

For the production of press rollers, Fote actively introduces advanced technologies from Germany and imports specialized materials from Japan. Featured in the high intensity, good tenacity and excellent wear resistance, the newly-produced press rollers is made by the alloy materials like nickel, chromium, manganese, molybdenum and titanium.

Technological innovation is the great tendency of social development. Morality oriented, people will be honest; quality rooted, product will be excellent. As a professional manufacturer of coal briquette machine, Fote is quite confidence with the development of itself in the near future.

In a word, your satisfaction with the total output is the endless pursuit of Fote briquetting machine manufacturer. With advanced technologies being introduced from America, Germany, Japan and Australia and products being exported to more than 30 countries, Fote Machinery is always doing its best to offer the best products and services for customers. Looking forward to working with you in the near future.

Fote Heavy Machinery: http://www.coal-briquettemachine.com

Fote Official Email: vip@sinoftm.com